Pioneer Premier DEH-P790BT - Manuel (Page 24)

2 Connection
To connect your Bluetooth audio player to this
unit, refer to Connecting the most recently con-
nected Bluetooth audio player on the next page
and Connecting a Bluetooth audio player on
this page.
# Once connected via Bluetooth wireless tech-
nology,
“Play”, “Stop” and “Pause” on Bluetooth
audio player can be operated in the BT Audio
source.
# Before you can use audio players you may
need to enter the PIN code into this unit. If your
player requires a PIN code to establish a connec-
tion, look for the code on the player or in its ac-
companying documentation. Enter the PIN code
referring to Entering PIN code for Bluetooth wire-
less connection on page 47.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn
MULTI-CONTROL to switch between the
functions in the following order:
Connection open (connection open)
—
Disconnect audio (disconnect audio)
—
Connect audio (connect audio)
—Play (play)
—Stop (stop)—Pause (pause)—
Auto connect (auto connect)
—Device info.
(device information)
# If a Bluetooth audio player is connected via
A2DP profile, only
Disconnect audio,
Auto connect and Device info. appear in the
function menu.
# If a Bluetooth audio player has not been con-
nected to this unit yet,
Connection open,
Connect audio, Auto connect and Device info.
appear in the function menu and other functions
are not available.
# To return to the playback display, press BAND.
# If you do not operate functions except for
Connection open, Disconnect audio and
Connect audio within about 30 seconds, the dis-
play is automatically returned to the ordinary dis-
play.
Note
Depending on Bluetooth audio players connected
to this unit, function operations may not be cor-
rectly operated.
Connecting a Bluetooth audio
player
Putting the unit in Connection open mode al-
lows you to establish a Bluetooth wireless con-
nection from your Bluetooth audio player. You
may need to refer to the operation manual that
came with your Bluetooth audio player if you
are unsure how to initiate a connection from
your audio player.
1 Use MULTI-CONTROL to select
Connection open in the function menu.
2 Press MULTI-CONTROL to open the con-
nection.
Always waiting is displayed. This unit is now
on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit will be automatically established.
Operating this unit
En
24
Section
02