About the liquid crystal display (lcd) screen, Keeping the display in good condition, About the small fluorescent tube – Pioneer AVD-W8000 Manuel d'utilisation

Page 25

Advertising
background image

24

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

About the Liquid Crystal Display (LCD) Screen

• Small black dots or white dots (bright dots) may appear on the LCD screen. These are

due to the characteristics of the LCD screen and do not indicate a problem with the dis-
play.

• At low temperatures, the LCD screen may be dark for a while after the power is turned

ON.

• The LCD screen will be difficult to see if it is exposed to direct sunlight.

Keeping the Display in Good Condition

• When removing dust from the screen or cleaning the display, first turn the system power

OFF, then wipe with a soft dry cloth.

• When wiping the screen, take care not to scratch the surface. Do not use harsh or abra-

sive chemical cleaners.

• Do not use a wet cloth for cleaning. Do not use organic solvents, such as benzine and

thinner, either.

About the Small Fluorescent Tube

• A small fluorescent tube is used inside the display to illuminate the LCD screen.

* The fluorescent tube is an expendable and has a limited service life.
* The fluorescent tube should last for approximately 10,000 hours, depending on oper-

ating conditions. (Using the display at low temperatures reduces the service life of the
fluorescent tube.)

* When the fluorescent tube reaches the end of its useful life, the screen will be dark

and the image will no longer be projected. If this happens, consult your dealer or the
nearest authorized PIONEER service facility.

Advertising