Pioneer DEH P4000UB - Manuel (Page 43)

% Select a SIRIUS band.
Band can be selected from
SR-1, SR-2 or SR-3.
% Select a channel.
Push
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Switching the SIRIUS display
% Press DISP to switch the SIRIUS display.
Each press of
DISP changes the SIRIUS dis-
play in the following order:
Channel name
—Category name—Artist name
—Song title/program title—Composer name
# You can scroll the text information to the left
by pressing and holding
DISP.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Press LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected sta-
tion has been stored in memory.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.
Note
You can also recall stations assigned to preset
tuning numbers by pushing
MULTI-CONTROL up
or down.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to
select.
3 Turn MULTI-CONTROL to select the
function.
CH SELECT MODE (channel select mode set-
ting)
—TEAM SETTING (team setting)—
GAME ALERT (game alert setting)
—
GAME INFO (game info)
# You can also perform the same operations by
pushing
MULTI-CONTROL up or down.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the previous display, press BACK.
! To return to the main menu, press and hold
BACK.
! To return to the ordinary display, press
BAND/ESC.
Available accessories
En
43
English
Section
06