Pioneer GEX-P5700TV - Manuel (Page 9)

Remote control
This units supplied remote control is mainly
for use by rear seat passengers. When using,
point at the front panel or signal receptor on
the combined Pioneer head unit.
1 CHCALL button
SRC : OSD ON mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
front and rear display.
SRC : OSD OFF mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
rear display.
2 BAND button
Not used.
3 MENU button
Not used.
4 a/b/c/d buttons
SRC : OSD ON mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
SRC : OSD OFF mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
5 POWER button
SRC : OSD ON mode
Press to turn the rear display on or off when
the TV is not selected as a source.
SRC : OSD OFF mode
Press to turn the rear display on or off when
the TV is not selected as a source.
Other remote controls
You can also perform operations with the re-
mote controls shown below.
When using a Pioneer car DVD
players remote control
When using a remote control supplied with
SDV-P7, AVX-P7300DVD, XDV-P90.
1 r button
Press and hold to BSSM on or off.
2 Remote control operation mode switch
When operating a TV, be sure to set the re-
mote control operation mode switch to TV
position.
When using a Pioneer car DVD
players remote control
When using a remote control supplied with
AVH-P7600DVD, AVH-P7500DVD, AVH-
P6600DVD, AVH-P6500DVD, AVX-P8DVD or op-
tional remote control CD-R5.
1 1-10 (16) buttons
Press to do direct channel select.
2 Joystick
Move to do manual seek tuning and preset
tuning.
3 Remote control operation mode switch
When operating a TV, be sure to set the re-
mote control operation mode switch to TV
position.
2
5
3
1
4
Whats What
En
9
English
Section
03