Pioneer S-W3700-K - Manuel (Page 4)

4
En
S-FCR3300-K:
If the front, center and surround speakers are placed on a hard
surface, such as wood or tile place four non-skid pads on the
bottom flat surface of the speakers.
S-W3700-K:
Attach the large non-skid pads to the base of the subwoofer.
Use the adhesive side of the pads to attach them to the base
of the subwoofer.
OPTIONALLY, ATTACH THE SURROUND
SPEAKERS TO THE SPEAKER STANDS
(S-FCR3700 ONLY)
For each speaker,line up the spurs on the stand with the holes
on the back of the speaker and insert, then secure the speaker
to the stand with the screw provided.
WALL-MOUNTING THE SPEAKERS
Before mounting
• Remember that the speaker system is heavy and that its
weight could cause the screws to work loose, or the wall
material to fail to support it, resulting in the speaker
falling. Make sure that the wall you intend to mount the
speakers on is strong enough to support them. Do not
mount on plywood or soft surface walls.
• Mounting screws are not supplied. Use screws suitable for
the wall material and support the weight of the speaker.
S-FCR3700:
Surround and Center speakers
S-FCR3300-K:
Front and Surround speakers
Note
• If you are unsure of the quality and strength of the walls,
consult a professional for advice.
• Pioneer is not responsible for any accidents or damage
that result from improper installation.
Center speaker Front or Surround
speakers
Large non-skid pads
Subwoofer
3/16 in. to 1/4 in.
(5 mm to 7 mm)
3/16 in.
(5 mm)
3/8 in.
(10 mm)
Mounting screw
(not supplied)
5 mm to 7 mm
3/16 in. to 1/4 in.
5 mm
3/16 in.
10 mm
3/8 in.
Mounting screw
(not supplied)
A4_S-FCR3700_3300-K_W3700-K_En_Fr.book 4 ページ ２００９年３月１９日 木曜日 午前９時４８分