Preparation – Panasonic DMW-MCTZ3 Manuel d'utilisation

Page 12

Advertising
background image

12

VQT1F25

Preparation

-Setting the O-ring- (continued)

4

Inspect the opposite side of the O-ring in the same way.

5

Apply the grease (supplied).

Apply a rice-grain size of grease (supplied) evenly to the O-ring with the tip of
your finger.

Dirt or dust will stick to the O-ring if you apply too much grease.

Use only the specified grease. If you use other types of grease, the
surface of the O-ring may be damaged causing water leakage.

Do not apply the grease with paper or a cloth. The fibers from the paper or cloth
may stick to the O-ring.

6

Fit the O-ring evenly into the O-ring groove.

Check the following:

There is no dirt sticking to the O-ring.

The O-ring has not come out.

The O-ring is not twisted.

The O-ring is not stretched too much.

CORRECT

INCORRECT

DMW-MCTZ3.book 12 ページ 2007年2月6日 火曜日 午後1時21分

Advertising