Kindred USA Plumbing Product - Manuel (Page 2)

FARMHOUSE SINKS
Installation Options
With appropriate planning, Kindred Farmhouse sinks may be installed several different ways.
The sink ... the base cabinet unit ... and the countertop ... must be selected with a specific installation in mind.
Kindred Farmhouse sinks may be installed as:
1. Undermount sinks (rim of the sink is below the countertop)
2. Built-up sinks (rim of the sink is raised above the countertop)
Built-up sinks may be installed with up to 1 1/2" of the side of the sink exposed
(above the top surface of the countertop).
Kindred Farmhouse sinks may also be installed with the front corners of the apron flush to adjacent cabinets, or alternatively,
the front corners of the apron may extend out beyond the face of adjacent cabinets by as much as 1/2". We would caution you
to make allowance for installation of the faucet. Position the sink so that there is enough clearance behind the sink to allow
for a backsplash, and full mobility of the faucet lever.
The farmhouse sink has a 3/4" flange on the underside of the apron that will support the unit.
Dab silicone to the base cabinet frame that will contact the sink flange.
Then position the unit either flush with the front face of the cabinet, or extend the unit up to 1/2" beyond the front face of the
cabinet.
31216
2 1105
Countertop
9" Sink Apron
Countertop
9" Sink Apron
4 5/8" 19 3/8"
5/8"
24" Cabinet
5 1/8" 18 7/8" 1 1/8"
5/8"
1/2"
24" Cabinet
Flush Front
LINEAR
Extended Front
4" 20"
3/4"
24" Cabinet
4 1/2" 19 1/2" 1 1/4"
3/4"
1/2"
24" Cabinet
Flush Front
BOW
UNDERMOUNT SINKS BUILT-UP SINKS
Extended Front