Getting started, Resetting the unit, Detaching the front panel – Sony CDX-MP40 Manuel d'utilisation

Page 9: Resetting the unit detaching the front panel

Advertising
background image

9

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Remove the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.

Note
Pressing the RESET button will erase the clock setting
and some stored contents.

Detaching the front panel

You can detach the front panel of this unit to
protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
If you connect an optional amplifier and do not
use the built-in amplifier, the beep sound will be
deactivated.

1

Press

(OFF)*

.

CD/MD playback or radio reception stops
(the key illumination and display remain on).

*

If your car has no ACC position on the ignition
switch, be sure to turn the unit off by pressing

(OFF)

until the display disappears to avoid car

battery drain.

2

Press

(OPEN)

, then slide the front

panel to the right, and gently pull out
the left end of the front panel.

Notes
If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent
the speakers from being damaged.

Do not drop or put excessive pressure on the front

panel and its display window.

Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked
car or on a dashboard/rear tray.

Tip
When carrying the front panel with you, use the
supplied front panel case.

RESET button

continue to next page

t

1

2

Advertising