Sony PCV-J100 - Manuel (Page 33)

Troubleshooting
33
4 Select “I/O Device Configuration” and use the arrow keys to highlight
Parallel Port Mode.
5 When the desired setting displays, press the Escape key.
Topic: My CD drive tray does not open.

Use the eject button
1 Make sure the computer is turned on.
2 Press the Eject button on the drive.

Use the My Computer icon
1 Click the My Computer icon on the Windows
®
desktop.
2 Right-click the CD-ROM icon.
3 Select the Eject option from the pop-up menu.
Topic: I cannot play a CD-ROM.

After inserting your CD, wait a few seconds for it to be detected before
trying to access it.

Make sure you place the disc in the tray with the label side facing up.

Make sure the software is installed according to the program’s instructions.

If your drive reads some CDs, but not others, check the shiny side of the disc
for dirt or scratches. You may also need to clean the disc drive lens with an
appropriate cleaner.


You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP
options using the Plus (+) or Minus (-) keys.


For the PCV-J100, if the Eject button does not work, you must manually flip
down the CD front panel and then you can open the tray by inserting a
straightened, heavyweight paper clip into the emergency eject hole.