Sanyo ABC-VW24A - Manuel (Page 10)

E-9
Stopping the operation at a specified time
Continuous Mode
Operate in “HIGH” when vacuuming
Operate in “LOW” when sleeping
To generate a lot of sterile, electrolytic
mist and quickly clean the air in the room
OFF!
Pollen
Mold
Odors
Dust Mite
Droppings
Bacteria
Manual Operation
Press
Press
Press
Method of Use
Manual Operation
Timer Operation
Power Mist Mode
¡Press the fan speed button to choose
“LOW”, “MED”, or “HIGH” mode.
¡The volume of sterile, electrolytic mist generated during
High is strong (large). The volume is low (small) for all
other modes. The mist is generated intermittently.
¡Press the electrolyzed water button to turn the electrolyzed
water function “On” or “Off”.
¡Press the power mist button to operate in power mist
mode.
¡High (5 min) → Medium (25 min)
(The air flow indicator does not turn on.)
¡A sterile, electrolytic mist is intermittently generated for 30
minutes.
¡Once the power mist cycle is complete, the device
switches to automatic mode.
¡Press the fan speed button to cancel and to switch to a
different operating mode.
¡Press the off timer button and set to a preferred time.
Each time the button is pressed, the indicator lamp sets to
the timer according to the lamp.
¡The indicators change according to the amount of time
that has passed and the lights indicate the amount of time
remaining.
¡Once the pre-determined amount of time passes, the
device automatically turns off.
* The power mist mode cannot be set with a timer.
* When the mode is switched to power mist while the timer
is operating, the configured timer cancels.
1 Hour 2 Hours 8 Hours
Continuous
Operation
(The lamp does not turn on.)
ABC-VW24A_GB_US.qxd 09.10.1 4:52 PM ページ9