Sony AVD-C70ES - Manuel (Page 35)

Pla
ying Discs
35 US
Additional operations
To Operation
Stop Press x.
Pause Press X.
Resume play after Press X or H.
pause
Go to the next chapter, Press >.
track, or scene in
continuous play mode
Go back to the Press ..
preceding chapter, track,
or scene in continuous
play mode
Stop play and remove Press A on the
the disc receiver.
Mute the sound Press MUTING. To
cancel muting, press it
again or turn up the
volume.
Change a disc while Press EX-CHANGE on
playing another disc the receiver.
Play the desired disc Press DISC 1-DISC 5
directly on the receiver.
Notes
• Do not push the disc tray when closing it. Press A
on the receiver to close the disc tray.
• If there is no disc in any disc tray, “NO DISC”
appears on the front display.
./>
H
X
x
MUTING
To turn off the receiver
Press [/1 on the remote. The receiver enters
standby mode and the STANDBY indicator
lights up in red. To turn off the receiver
completely, press POWER on the receiver.
While playing a disc, do not turn off the
receiver by pressing POWER. Doing so may
cancel the menu settings. When you turn off
the receiver, first press x to stop playback
and then press [/1 on the remote.
To select a disc by using the remote’s
display
Press </> until “<DISC>” appears in the
remote’s display, and move the cursor (
c) to
“DISC 1 –DISC5” or “DISC SKIP” by
using the Scroll key, then press the Scroll
key.
z On Auto-Function
If a disc is already inserted to any disc tray, you can
play it back simply by pressing the H or its
corresponding DISC 1-DISC 5, even if the previous
music source was not a DVD. The function changes
to DVD and playback starts (Auto-Function).
However, if Program Play is on, you can only start
playback by pressing the H.
z On the DISC indicators
The DISC indicators change as follows:
– light blue: the disc tray is chosen, or the disc is
being play backed.
– off: there is no disc.
– dark blue: a disc is placed on the disc tray, however,
the disc tray is not chosen. Before the disc
existence is checked, the indicators are in dark
blue.
Saving the power in standby mode
after turn on the receiver
Press [/1 on the remote once.
z While the receiver is in standby mode, the
STANDBY indicator on the receiver lights up.
To cancel standby mode
Press [/1 on the remote once.