Samsung DVD-C450K - Manuel (Page 6)

6
Note
- What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace
output method has. Progressive scanning method can provide better and clearer picture quality.
C. Connection to an Audio System (2 Channel Amplifier, Dolby
Digital,MPEG2 or DTS Amplifier)
- Using the audio cables, connect the
AUDIO (red and white) OUT terminals on the rear of the
DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable,
connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier
- Using the video signal cable(s), connect the VIDEO or COMPONENT terminals on the rear of the
DVD player to the VIDEO or COMPONENT terminals of your TV.
- Turn on the DVD player, TV, and Amplifier.
- Press the input select button of the Amplifier to select
external input in order to hear sound
from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's audio input.
RED
A
B
C
2-Channel stereo ampilfier,
Dolby Digital or
DTS amplifier
Coaxial Cable
Component Cable
Video Cable
Audio Cable
WHITE
RED
RED
WHITE
YELLOW
YELLOW
RED
BLUE GREEN
BLUE
GREEN
RED
WHITE
RED WHITE
Basic functions
Playing a Disc
Before Play
- Using your TV’s remote control, turn on your TV and set it to the Video Input your DVD player is
connected to.
- If you connected the DVD player to an external Audio System, turn on your Audio System and
set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, the screen to the
right appears: If you want to select a language, press the π/† button, and then press the ENTER
button. (This screen will only appear when you plug in the player for the first time.) If the language
for the startup screen is not set, the settings may change whenever you turn the power on or
off. Therefore, make sure that you select the language you want to use.Once you select a menu
language, you can change it by pressing ( ■ / ) the button on the front panel of the unit for more
than 5 seconds with no disc in the unit. Then the SELECT MENU LANGUAGE window appears
again where you can reset to your preferred language.
Note
- The speed marked in this function may be different from the
actual playback speed.
- No sound is heard during search mode (Except CD).
DVD 2X, 4X, 64X, 128X
CD 2X, 4X, 8X
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump
to the next selection.
Searching through a Chapter or Track
During play, press the
SEARCH ( or ) button on the remote control for more than 1 second.
- If you want to search at a faster speed on the DVD or CD, press the SEARCH button.
Skipping Tracks
During play, press the SKIP ( or ) button.
- When playing a DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a CD, if you press the SKIP ( ) button, it moves to the next track. If you press the
SKIP ( ) button, it moves to the beginning of the track.
Using the Display Function
1. During play, press the INFO button on the remote control.
2. Press the π/† buttons to select the desired item
3. Press the √/® buttons to make the desired setup and then press the
ENTER button.
4. To make the sceen dissapear, press the INFO button again.
When Playing a DVD/MPEG4