Sony SPP-ID976 Manuel d'utilisation

Page 14

Advertising
background image

Getting Started

14

US

Notes
• If the local area code is already entered, it appears on the display in step 5. To

enter a different local area code, see “To change the local area code” below.

• Do not allow more than 20 seconds to elapse between each step of the

procedure.

Tips
• You may press Jog Dial instead of (PGM) in step 7.
• To check the current local area code, perform steps 1 to 5. The local area code

appears on the display for about 20 seconds.

To change the local area code

1

Perform steps 1 to 5 on page 13.

The current local area code appears on the display.

2

Turn Jog Dial down to erase the current local area code.

3

Enter a new local area code using the dialing keys.

4

Press (PGM).

You will hear a long confirmation beep.

To erase the local area code

You can erase the local area code. Perform steps 1 and 2 above, then
press (PGM).

The local area code will be erased, and you will hear a long
confirmation beep.

Step 4: Entering the area code (continued)

5

Press Jog Dial.
”ENTER AREA CODE“ appears on the display.

6

Enter three digits of the local area code using the dialing
keys.

7

Press (PGM).
You will hear a long confirmation beep.

Advertising