Sanyo PLC-XE50 - Manuel (Page 72)

Lamp Replacement Label
Appendix
PIN Code Number Memo
Put the label below (supplied) to a prominent place of the
projector’s body while it is locked with a PIN code.
While the projector is locked with the PIN code...

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service station.
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
PIN Code Lock No.
Logo PIN Code Lock No.
Factory default set No: 1 1 1 1*
Alarm PIN Code No.
Lamp Replacement Label
When using the projector ceiling-mounted, put
the Lamp replacement label (supplied) on in a
prominent place of the projector's body to check
the Replacement Lamp Type Number.
Put the label below (supplied) on in a prominent place of the
projector’s body while the Antitheft alarm function is set.
While the Antitheft alarm function is set....