Playing using a timer, Playing cds, Changing the programmed order – Sony CDP-CX355 Manuel d'utilisation

Page 20: Checking the programmed order

Advertising
background image

Playing CDs

20

GB

Changing the programmed order

You can change your program before you start playing.

To

Erase a track or disc

Erase the last track or
disc in the program

Add tracks or discs to the
end of the program

Change the whole
program completely

You need to

Press CHECK until the track or
disc you do not want appears in
the display, then press CLEAR

Press CLEAR. Each time you
press the button, the last
programmed track or disc will be
cleared.

Follow the programming
procedure

Hold down CLEAR until
“CLEAR” appears in the display
to erase the whole program, then
create a new program following
the programming procedure

6

To program other discs/tracks, do the following:

To program

All tracks of another disc(s)

Other tracks on the same disc

Other tracks on other discs

7

Press

· to start Program Play.

To cancel Program Play

Press CONTINUE.

Checking the programmed order

You can check your program before or after you start
playing.

Press CHECK.
Each time you press this button, the display shows the
disc and track number of each step in the programmed
order. (When a whole disc is programmed as one step,
“ALL” appears instead of the track number.) After the
last step in the program, the display shows “– END –”
and returns to the original display.

Repeat Steps

2 to 4

5

2 to 5

Erasing the program stored in memory

1

Press PROGRAM repeatedly in the stop mode
until the program number (PROGRAM 1, 2, or 3)
you want to erase appears in the display.

2

Hold down CLEAR until “CLEAR” appears in the
display.

Playing Using a Timer

You can start playing a disc at any given time by
connecting a timer (not supplied). Refer also to the
instructions for the timer if you need help.

TIMER

Play mode buttons

1

Press one of the play mode buttons to select the
desired play mode.

2

Set TIMER on the player to PLAY.

3

Set the timer to the desired time.
The player turns off. When the set time comes, the
player turns on and starts playing.

4

After you have used the timer, set TIMER on the
player to OFF.

I /

u

+100

Advertising