Sony RM-TP1 - Manuel (Page 10)

10 GB
Registering the
components
The following procedure lets you set up the
commander to operate the components.
RM SELECT screen setup
(HOOK UP)
You can set the RM SELECT screen not to
display the remotes (components) you do not
use.
1
Touch RM SELECT.
The RM SELECT screen appears.
2
Touch .
The pull-down menu appears.
3
Touch HOOK UP in the pull-down
menu.
The HOOK UP screen appears.
Basic Operations
4
Select the component not to be
displayed and touch NO.
To display other items, use the jog dial, or
touch v or V to scroll through the list.
To display the components in the RM
SELECT screen
Touch YES instead of NO in step 4.
Tip
Components that have been registered (see below) are
set to “YES” automatically.
Registering the components
(IR SETUP)
1
Touch RM SELECT.
The RM SELECT screen appears.
2
Touch the remote (component) you
want to register (“VIDEO1” for
example).
Or, turn the jog dial to select the remote
(component), then press the jog dial to enter
the selection. The screen for operating the
component appears.
To display other items, use the jog dial, or
touch v or V to scroll through the list.
3
Touch .
The pull-down menu appears.
Touch here to display the
pull-down menu.
RM SELECT
Pull-down menu