Recording the video picture as a still image, Recording the video picture as a still, Image – Sony DMP-1000 Manuel d'utilisation

Page 36

Advertising
background image

36

GB

Making Various Prints

You can record the playback picture from the video
equipment as a still image onto the floppy disk.

Before you begin
1
Turn on the printer and television and set the input

selector of the television to “VIDEO.”

2 Set INPUT SELECT to “VIDEO MOTION” or

“VIDEO STILL.”

1

Set the print mode dial to “

(standard)” or split

printing mode.

2

Select the image to be recorded.

For details of operating procedures, refer to the
pages for the corresponding printing mode.

1

Turn on and start playback on the video
equipment.

2

Press CAPTURE when the picture you want to
record appears on the screen.

3

Insert the floppy disk into the floppy disk slot.

Insert a floppy disk formatted in the MS-DOS
format. Check that the write protect switch on the
disk is set to the write enable position.

4

Press SAVE.

The access indicator of the floppy disk drive lights
up, and the displayed image is recorded onto the
floppy disk.

Recording the video picture as
a still image

When you set the print
mode dial to the split
mode
You can also record the
picture in the split mode.
In this case, only the most
recently selected picture
is recorded onto the
floppy disk.

Re-selecting the image
Press PICTURE before
pressing SAVE. The
playback picture appears
on the screen. Follow step
2. (You cannot capture a
image while the
MEMORY indicator lights
up. Press CAPTURE
while the MEMORY
indicator goes off.)
You can also re-select the
image by pressing the
arrow (

B) instead of

pressing PICTURE.

If you press CLEAR ALL,
the printer is reset to
stand by mode.
Perform printing
procedures from the
beginning.

Advertising