Samsung 4 Series - Manuel (Page 7)

English - 
What is HDMI?
“High Definition Multime��ia interface” allows the transmission of high ��efinition ��igital vi��eo ��ata an�� multiple channels of
digital audio.
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The
difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports
DVI IN(HDMI) [R-AUDIO-L]
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i
HDMI/DVI 50Hz X X X O O O
HDMI/DVI 60Hz X O X X O O
Component O O O O O O
4 AUDIO OUT [R-AUDIO-L]
Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theatre.
5 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial / A cable television network / A satellite network
6 SERVICE
LE6A66, LE6A67
Connector for SERVICE only.
LEA66, LEA67, LEA6, LE7A66, LE7A67, LE0A66, LE0A67, LE0A6
Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your
remote control.
7 COMMON INTERFACE Slot
When CI Card isn’t inserted in some channels, "Scrambled Signal" is displayed on the screen.
The pairing information containing a telephone number, CI Card ID, Host ID and other
information will be displayed in about 2~3 minutes. If an error message is displayed,
please contact your service provider.
When the channel information configuration has finishe��, the message "Up��ating
Completed" is displayed, indicating that the channel list is now updated.
You must obtain a CI Card from a local cable service provider. Remove the CI Card by
carefully pulling it out with your hands since dropping the CI Card may cause damage
to it.
Insert the CI-Card in the direction marked on it.
The place of the COMMON INTERFACE Slot may be different depending on its
model.
8 SERVICE
Connector for SERVICE only.
9 S-VIDEO or VIDEO / R-AUDIO-L
Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V
device.
0 HEADPHONES jACK
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the
built-in speakers will be disabled.
➣
-
-
-
➣
-
-
-
-
-
-
-
➣
➣
➣
-
-
-
-
BN68-01424E-02Eng-0514.indd 5 2008-05-15 ¿ААь 9:34:10