Sony DVP-S300 3-865-371-11 - Manuel (Page 6)

6 EN
Getting Started
OPTICAL COAXIAL
DOLBY DIGITAL (AC-3) PCM/
DIGITAL OUT R–AUDIO 2–L LINE OUT VIDEO 2
R–AUDIO 1–L VIDEO 1
1
2
S VIDEO OUT
Hooking Up the System
Overview
This section describes how to hook up the CD/DVD
player to a TV (with audio/video input jacks) and/or
an amplifier. You cannot connect this player to a TV
without a video input connector. Be sure to turn off
the power of each component before making the
connections.
pTo listen to the sound through TV speakers
pTo listen to the sound through speakers connected to
an amplifier (receiver)
CD/DVD player
To AUDIO
OUT To VIDEO
OUT
To an AC outlet
To video
input
To audio
input
TV
To an AC outlet
: Signal flow
CD/DVD player
To
AUDIO
OUT To
VIDEO
OUT
To an AC
outlet
TV
To audio
input
: Signal flow
To an AC outlet
To an AC outlet
Amplifier
(Receiver)
Unpacking
Check that you have the following items:
• Audio/Video/S-link connecting cord (1)
• S video cable (1)
• Remote commander (remote) RMT-D105A (1)
• Size AA (R6) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and
– on the batteries. When using the remote, point it at
the remote sensor g on the player.
z
You can control Sony TVs and AV receivers using the
supplied remote
See page 30.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you will not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Getting Started
To video input
OPTICAL COAXIAL
DOLBY DIGITAL (AC-3) PCM/
DIGITAL OUT R–AUDIO 2–L LINE OUT VIDEO 2
R–AUDIO 1–L VIDEO 1
1
2
S VIDEO OUT