Operations usb device network connection hookup – Sony BDP-SX1 Manuel d'utilisation

Page 22

Advertising
background image

US

22

Playback does not start from the
beginning of content.

, Press OPTIONS, and select “Play from

beginning.”

Playback does not start from the resume
point where you last stopped playing.

, The resume point may be cleared from

memory when
– you open the disc lid.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
– you change some settings under the

“Setup.”

The player does not respond to any button.

, The ?/1/HOLD switch is set in the

direction of HOLD.

, Moisture has condensed inside the player

(page 3).

, Disconnect the AC power cord from the

wall outlet and slide the ?/1/HOLD switch
in the direction of ?/1 and hold for 10
seconds until the POWER indicator on the
player turns off.

The player does not detect a USB device
connected to the player.

, Make sure that the USB device is securely

connected to the USB jack.

, Check if the USB device or a cable is

damaged.

, Check if the USB device is on.
, If the USB device is connected via a USB

hub, connect the USB device directly to the
player.

The player cannot connect to the network.

, Check the network connection (page 11)

and the network settings (page 20).

The message “A new software version is
available. Please go to the "Setup" section
of the menu and select "Network update"
to perform the update.” appears on the
screen when turning the player on.

, See “Network Update” (page 16) to update

the player to a newer software version.

There is no picture or the picture is not
output correctly.

, Check that all the connecting cables are

securely connected.

, Switch the input selector on your TV to

display the signal from the player.

, For HDMI connections, try the following:

1

Turn the player off and on again.

2

Turn

the connected equipment off and on again.

3

Disconnect and then reconnect the HDMI

cable.

, The HDMI OUT jack is connected to a DVI

device that does not support copyright
protection technology.

, For HDMI connections, check the “HDMI/

LCD Video Format” settings in the “Screen
Settings” setup (page 17).

, For BD-ROMs, check the “BD/DVD-ROM

1080/24p Output” setting in the “Screen
Settings” setup (page 17).

, The pictures are displayed in standard

quality on the HDMI-connected TV when
the audio/video cable is connected at the
same time. Disconnect the audio/video
cable to enjoy high quality digital pictures
on the HDMI-connected TV.

Operations

USB device

Network connection

Hookup

Advertising