Samsung DC68-02657F - Manuel (Page 27)

cleaning and maintaining your washer _27
03 CLEANING AND MAINT
AINING
PURE CYCLE
This course is a self-cleaning course that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Press the Pure Cycle button.
• You can only use the Delay Start
function.
3. Press the Start/Pause button.
• If you press the Start/Pause button,
the Pure Cycle course begins.
• Using the Pure Cycle course, you can clean the drum without using a cleansing agent.
• Never use the Pure Cycle course when laundry is in the washing machine. This may result in
damage to the texture or a problem with the washing machine.
• If you want to use drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer.
The Pure Cycle Auto Alarm Function
• If the “Pure Cycle” button is lit after a wash, it indicates that tub (drum) cleaning is required.
In this case, remove the laundry from the washing machine, turn the power on, and clean the
drum by performing the Pure Cycle course.
• If you do not perform the Pure Cycle course, the lamp of the “Pure Cycle” button is turned
off. However, the “ Pure Cycle” button is lit again after two washes are performed. However
this will not result in a problem with the washing machine.
• Although generally, the Pure Cycle Auto Alarm appears once a month or so, the frequency
may differ depending on the number of times the washing machine is used
CAUTION
WF410AN-02657F_EN.indd 27 2010-04-29 ¿АИД 3:55:58