Basic operations, English, Selecting the source to play – JVC RX-5045B Manuel d'utilisation

Page 13: Daily operational procedure 1 turn on the power, 2 select the source, 3 adjust the volume, 4 select the surround or dsp modes, Turning on the power, Press one of the source selection buttons

Advertising
background image

11

English

Basic Operations

The following operations are commonly used when you play any sound sources.

Operations hereafter will be explained using the buttons on the front panel.
You can also use the buttons on the remote control for the same functions if they have the same and similar names/marks.

Selecting the Source to Play

When you have connected digital source components using the
digital terminals, first change the input mode for these components
to the digital input mode (see page 13).

Press one of the source selection buttons.

For RX-6040B/RX-6042S

Note:

When you select “DVD MULTI,” you can enjoy analog discrete output
sound (5.1-channel surround reproduction) from the external
component.
• You may need to select analog discrete output mode on the

external component.

• When using the headphones, you can listen to the front channel

sounds (left and right) only.

• Surround and DSP modes (see pages 25 and 28) cannot be

applied to “DVD MULTI.”

For RX-5040B/RX-5042S/RX-5045B

Note:

When connecting a CD recorder to the TAPE/CDR jacks, change the
source name shown on the display. For details, see page 14.

Daily Operational Procedure

1 Turn on the power.

• See “Turning On the Power” below.

2 Select the source.

• See “Selecting the Source to Play” to the right.

3 Adjust the volume.

• See “Adjusting the Volume” on page 12.

4 Select the Surround or DSP modes.

• See “Activating the Surround Modes” (page 27) and

“Activating the DSP Modes” (page 29).

Turning On the Power

Press STANDBY/ON

(or STANDBY/ON

AUDIO on

the remote control).

The STANDBY lamp goes off.

To turn off the power (into standby mode),
press STANDBY/ON

(or STANDBY/ON

AUDIO on the

remote control) again.
The STANDBY lamp lights up.

Note:

A small amount of power is consumed in standby mode. To turn off
the power completely, unplug the AC power cord.

On the front panel

On the remote

On the front panel

On the remote

VOLUME

Current source name appears.

Current volume level appears.

DVD MULTI

DVD

VCR

CD

FM

AM

TAPE/CDR

TV SOUND

SOURCE NAME

TAPE/CDR

CD

DVD

DVD MULTI

FM/AM

TV SOUND

VCR

DVD

VCR

CD

FM/AM

TAPE/CDR

TV SOUND

SOURCE NAME

TAPE/CDR

CD

DVD

FM/AM

TV SOUND

VCR

Selected source name appears.

VOLUME

11-15_5040&6040[C]f.p65

1/16/04, 11:31 AM

11

Advertising