Memorex mph 6955 - Manuel (Page 7)

▼
Mounting Directly on a Wall
If you do not have a standard wall plate, you can mount the
phone directly on a wall. Before mounting your cordless
telephone, consider the following:
• Select a location away from electrical cables, pipes, or other
items behind the mounting location that could cause a
hazard when inserting screws into the wall.
• Make sure the wall material is capable of supporting the
weight of the base and handset; otherwise, damage to the
unit could result.
• Use #10 screws with anchoring devices suitable for the wall
material where the base will be placed.
1. Insert the screws, with their appropriate
anchoring devices, 3 5/16inches apart.
Allow 3/16of an inch between the wall
and screw heads for mounting the phone.
2. Plug the AC adapter into the base.
3. Place the AC adapter cord inside the left molded channel
cord holder.
4. Plug one end of the telephone cord into the
TEL LINE
jack on
the base.
5. Place the telephone cord into the right molded channel
cord holder.
6. Place the base on the screws and push down until it’s
firmly seated.
7. Plug the other end of the telephone line into the telephone
wall jack. (Remember, the phone must be fully charged
before you can use it.)
8. Plug the AC adapter into a standard 120V AC wall outlet that is
not controlled by a wall switch.
9. Raise the antenna on the base.
7
!
Use only the Memorex AC adapter that came
with the phone.
H:...MPH 6955 Map OM.vp
Mon Jun 28 16:00:17 1999
Color profile: Disabled
Composite Default screen