Miele SEB 228 Manuel d'utilisation

Page 5

Advertising
background image

Description of the Powerbrush

The beater bar in the Powerbrush is
driven by a motor. Two of the four
rollers are height-adjustable, so that
you can set the Powerbrush to the
desired distance from the floor.

Recommended use

,

Do not use the Powerbrush on

high quality, hand knotted rugs, for
example Berber or Persian rugs, as
well as extremely long piled area
rugs and carpets. There is a danger
of the threads being pulled out. Turn
the Powerbrush off to vacuum these
types of floor coverings and use only
suction.

The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.

To clean hard flooring, it is better to use
the floor brush.

Observe the cleaning instructions of
the floor manufacturer.

Using the Powerbrush

^ For best results, move the

Powerbrush slowly back and forth
over the carpet.

Carpet fringes can be brushed flat if
you carefully glide the Powerbrush in
the proper direction (from the carpet
toward the floor).

Connecting the Powerbrush

To connect the Powerbrush to your
vacuum cleaner refer to the illustrations
at the end of these Operating
Instructions.

Height adjustment

To help better care for your flooring,
you can select one of 5 brush distances
from the floor. The selected setting will
be displayed.

Setting 1 - closest to the floor

Setting 5 - highest distance from the

floor

^ Press the foot switch (as shown) until

you reach the desired setting.

Releasing the suction elbow

^ Press the release button c and

remove the intake socket.

en

5

Advertising