Minolta Di620 - Manuel (Page 60)

3-23
5. Selecting the Finishing
Mak
in
g
C
o
pies
Chapter 3
Touch the desired finishing function key.
Touch .
Touch .
Touch the desired hole-punching position.
Touch .
NOTES
• The size of the copy paper for Hole Punch is
11
″
×17
″
L, LegalL, LetterL and LetterC only.
• Hole Punch is not possible in the Interrupt
mode.
• When making copies in the Hole Punch Mode,
make sure to load the originals into the
Document Handler in the correct direction.
☞p. 3-31
<Only when the Finisher FN-3 is mounted>
• The number of punch holes can be changed
between “2-Hole” and “3-Hole” by using the
Knob located inside the Finisher.
* When changing the setting for the number of
holes to be made, be sure the marks are
aligned.
Pull out Knob: 2-Hole
Push in Knob: 3-Hole
* The number of punch holes can be graphically
identified on the Display.
Hole Punch
1
1155O270CB
2 Hole Punch
1155P014CB
3 Select Position
1155P015CB
4
1155P026EB
5 Enter
Knob
1155O723AA