Memorex DBVT1341 - Manuel (Page 10)

10
ANT ANT 75 ohm
Coaxial
Cable
300-75 ohm Matching Transformer
Antenna Jack Antenna Jack
ANT
300-75 ohm Matching
Transformer
UHF 300 ohm
VHF 300 ohm
Antenna Jack
Combiner
ANT
UHF 300 ohm
VHF 75 ohm
Antenna Jack
Combiner
Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the Combiner (not supplied). Attach the
Combiner to the Antenna Jack.
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna
system. If you are using a cable TV service (CATV), see page 11 for Cable TV connections.
Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied). Connect the VHF 300 ohm twin-lead wire
to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the
Antenna Jack.
ANTENNA CONNECTIONS
Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna Jack. If your combination VHF/
UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm Matching Transformer may be necessary.
Connect the VHF 75 ohm cable and UHF 300 ohm.
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
5A30301A E P02-11 04/10/2001, 18:00 10