Replace the 4 screws in the same holes, Close door to engage door strike – Maytag Bravos W10201177B Manuel d'utilisation

Page 15

Advertising
background image

15

Reinstall the door
1.
Remove the 4 screws and 2 hinges from the dryer door.
2. Replace the 4 screws in the same holes.

3. Remove the 4 screws from the opposite side of the door.

4. Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side

to attach the hinge to the front panel.

5. Install screws in the top hinge holes in the door. Do not tighten screws. Leave

approximately ¼" (5 mm) of screw exposed.

6. Hang door by placing screw heads into top slotted holes of hinges and slide door down.

Align bottom screw holes in hinge and door. Install two bottom screws. Tighten all hinge
screws.

7. Close door to engage door strike.

Screw & hinge
locations

Screw locations

A. Install these screws first.

A

A

Advertising