Motorola CP200 - Manuel (Page 26)

24
English
GETTING STAR
TED
RECEIVING
MONITORING
It is important to monitor traffic before
transmitting to ensure that you do not “talk
over” someone who is already transmitting.
TRANSMITTING
1 Turn your radio on.
2 Adjust the radio’s volume (see page 23).
3 Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
1 Press and hold the preprogrammed
Monitor button to access channel traffic.
2 Once channel traffice has cleared, proceed
with your call by pressing the PTT button.
3 A long press of the preprogrammed Monitor
button places the radio in Sticky Monitor
mode.
• You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Monitor mode and returns the radio to
normal operation.
1 Turn your radio on.
2 Use the Channel Selector knob to select the
desired channel.
3 Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
4 Release the PTT to listen.
03_GetStarted.fm Page 24 Monday, November 17, 2003 1:56 PM