Memorex MT2327 - Manuel (Page 6)

6
REMOTE CONTROL
(CONTINUED)
Before using the remote control, batteries must first be installed.
NOTES:
• While operating the TV, if the CH ▲ and ▼ buttons do not respond, press the “TV” button to reactivate TV mode.
• Some buttons that have same functions are called different names according to the brand and model of the product. For example,
CALL may be called "DISPLAY".
• The buttons A, B and C are used exclusively for each product. You can use these buttons whenever you want.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
2. Install two "AAA" batteries (not supplied).
3. Replace the battery compartment cover.
HOW TO USE THE REMOTE CONTROL
You can use the remote control to operate your VCR and Cable/
Satellite box as well as the TV after the batteries are installed
and you have registered the codes that operate your products.
Some buttons are used exclusively for each product and some
buttons are used in common with each product.
To operate your products correctly using this universal remote
control follow each step below.
POWER
1 2 3
4 5 6
7 8 9 0
TV VCR CABLE
CODE SET
CH ENTER
CH
CH
SET ENTER MENU
TV/AV QUICK VIEW CH.1/2 TV/CAP/TEXT
SLEEP AUDIO SELECT
REW F.FWD PLAY
TV/VCR PAUSE/STILL
REC VCR CH
STOP
RECALL RESET
MUTING
VOL VOL
A
B
C
A, B, C
B, C
Use two "AAA" size batteries. The batteries may last approxi-
mately one year depending on how much the remote control is
used. For best performance, it is recommended that batteries
should be replaced on a yearly basis, or when the remote
operation becomes erratic. Do not mix old and new batteries or
different types.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries in
this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture. (Follow battery manufacturer's
directions.)
A. For TV
1
Press the TV button first.
2
Aim remote at TV.
3
Press the POWER button.
4
Press other buttons to operate the features of your TV.
You can use the CH
▲ and ▼ buttons, the 0-9 buttons.
B. For VCR
1
Press the VCR button first.
2
Aim remote at VCR.
3
Press the POWER button to turn on VCR
4
Press other buttons to operate the features of your VCR.
You can use the VCR CH
▲ and ▼ buttons, the 0-9
buttons, the CH ENTER button.
C. For CABLE/SATELLITE box
1
Press the CABLE button first.
2
Aim remote at CABLE/SATELLITE box.
3
Press the POWER button to turn on your CABLE/
SATELLITE box.
4
Press other buttons to operate the features of your
CABLE/SATELLITE box. You can use the CH
▲ and ▼
buttons, the 0-9 buttons, the CH ENTER button.
3M00201A-E 8/2/02, 2:13 PM 6