Motorola MD70 - Manuel (Page 36)

14
Settin
g Up
4 Select FORMAT to scroll through the formats. Stop at
the format you want to set for the area code, then
scroll down to move to the next area code.
5 Repeat steps 3 and 4 to store up to 4 more area
codes. When you are finished, select DONE.
6 Select EXIT to return to the standby screen, or
scroll to a different menu option.
Setting the Date and Time
1 Select MENU.
2 Scroll to Date/Time and select SELECT.
3 Enter the time (2 digits are required for both hour
and minutes, so use a leading 0 for 1-digit
values).
4 If using a 12-hour clock, select AM/PM to switch
between am and pm.
5 Scroll down to move the next field.
6 Select CHANGE to change the time format (12 or 24
hour clock). Scroll down to move to the next field.
7 Select CHANGE to select date format
(MM/DD or DD/MM).
8 Scroll down to move the next field.
9 Enter the current date.
10 Select DONE.
11 Select EXIT to return to the standby screen, or
scroll to a different menu option.