Maytag W10260034A - Manuel (Page 5)

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance. The following is a guide to using your dryer.
Please refer to specific sections of this manual for more detailed information.
NOTE: This Use and Care Guide covers several different models. Your dryer may not have all of the cycles and features described.
STOPPING OR RESTARTING
To pause/stop the dryer at any time - Open the door or press
PAUSE/CANCEL once.
To restart the dryer - Close the door. Press and Hold START
button until dryer starts.
To end/cancel the dryer at anytime - Press PAUSE/CANCEL
twice or open the door.
Use a Timed Dry cycle to set a drying time
and temperature.
1. Press POWER.
2. Rotate the dial to select a Timed Dry Cycle.
3. Press the TIME ADJUST up or down until the desired drying
time is displayed.
4. Press TEMPERATURE until the desired temperature
illuminates.
5. Press and Hold START.
To make changes during a Timed Dry Cycle:
1. Press PAUSE/CANCEL once.
2. Adjust the Time and/or Options.
3. Press and Hold START.
TIMED DRY - Use this cycle if items are still damp after a
Sensor Dry cycle.
RAPID DRY - Use for items requiring a short drying time.
FRESHEN UP - Use this cycle to help smooth out wrinkles
from clean, dry clothes.
TIMED DRY CYCLES
SENSOR DRY CYCLES
Sensor Dry Cycles automatically match the cycle
setting to the type of load, and adjust drying
time for optimal performance. See the “Cycles
Sensor Dry Preset Settings Chart.”
To make changes during a Sensor Dry Cycle:
1. Press PAUSE/CANCEL once.
2. Select DRYNESS LEVEL and/or OPTION.
NOTE: Dryness Level selections can be made only while
using Sensor Dry Cycles. Selecting More, Normal, or Less
automatically adjusts the sensed time needed.
3. Press and Hold START.
1. Clean lint screen before each load.
2. Place laundry in dryer and shut door.
3. Press POWER.
4. Select SENSOR DRY or TIMED DRY Cycle.
5. Select WRINKLE PREVENT, if desired.
See “Additional Features.”
6. Select CYCLE SIGNAL to turn off, if desired.
See “Additional Features.”
7. Press and Hold START to start.
START
QUICK START GUIDE
5