Maytag W10343072A - Manuel (Page 4)

4
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW
Good air flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See “Installation
Instructions.”
The venting system attached to the dryer plays a big role in
good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Maintain good air flow by:
Good Better
n Cleaning your lint screen before each load.
n Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material.
n Use the shortest length of vent possible.
n Use no more than four 90° elbows in a vent system;
each bend and curve reduces air flow.
n Remove lint and debris from the exhaust hood.
n Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the “Installation Instructions” supplied with your
dryer for final product check.
n Clear away items from the front the dryer.
4"
(102 mm)
ACCESSORIES
This washer does not include inlet water hoses. See
“Installation Instructions” for installation accessories.
Enhance your dryer with these premium accessories.
For more high-quality items or to order, call
1-800-901-2042,
or visit us at www.maytag.com/accessories. In Canada call
1-800-807-6777, or visit us at www.whirlpoolparts.ca.
Part Number Accessory:
8212526 Washer drip tray, fits under all
All-purpose appliance cleaner 31682
Laundry supply storage cart 1903WH
Use Sensor Dry cycles for better fabric care and energy savings
Use the Sensor Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Sensor Dry
cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the
dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to
over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
USING LESS WATER AND ENERGY
This washer is designed to use less water and energy, and complies with
all 2011 energy standards. Wash cycles with controlled temperatures are
designed to maintain cleaning performance while using less water and
energy compared to older traditional washers. As a result, water levels will
be lower, and hot and warm wash temperatures may not be as warm as
you are used to.
Traditional washer Reduced water washer