Service, spare parts and guarantee – Makita UC 3000 Manuel d'utilisation

Page 17

Advertising
background image

17

Instructions for periodic maintenance

To guarantee a long life and to prevent damages the maintenance works described in the following must be regularly performed.
The product guarantee will automatically invalidate if these works are not carried out regularly and according to the instructions.

The user of the electric chain saw is not allowed to perform maintenance works which are not described in the instruction manual.
All other works must be carried out by a MAKITA service center.

General work

Electric chain saw

Regularly clean the outside.

Plastic case

Check for cracks and ruptures. In case of damage have it
immediately repaired at a service center.

Saw chain

Resharpen regularly.
Replace in time.

Guide bar

Turn over after a certain period of time so that the bearing
surfaces are uniformly worn.
Replace in time.

Sprocket

Have it replaced in time at a service center.

Chain brake

Have it inspected regularly at a service center.

Each time before putting

Saw chain

Check for damage and sharpness.

14-15

the saw into operation

Check the chain tension.

9

Guide bar

Check for damage, and remove burrs if necessary.

Chain lubrication

Functional check.

12

Chain brake

Functional check.

12

Power switch

Functional check.

11

Power supply cable

In case of damage have it replaced at a service center.

Oil tank cap

Check for tightness.

After each shutdown

Guide bar

Clean the oil inlet bore.

11

Chain carrier

Clean, especially the oil guide groove.

15

Storage

Chain oil tank

Empty.

10

Saw chain/guide bar

Demount, clean and lubricate slightly.
Clean the guide groove of the guide bar.

Electric chain saw

Store safely in a dry place. After a long storage time, have
the electric chain saw checked at a service center (resi-
dual oil can become resinic and the valve of the oil pump
clogged).

Service, spare parts and guarantee

Maintenance and repair

The maintenance and repair work of modern electric motors as well as all safety related assemblies require qualified technical
training and the availability of a special workshop equipped with special tools and testing devices.

We therefore recommend you to consult a MAKITA service center for the performance of all work not described in this instruction
manual.

The MAKITA service centers are provided with all the necessary equipment and skilled and experienced personnel to work out correct
customer solutions and to advise you in all matters accordingly.

Please contact the general agent or importer indicated on the back cover of this Instruction Manual, who will gladly provide you with
the address of your nearest MAKITA service center.

Spare parts

A reliable and continuous operation as well as the safety of your chain saw is also subject to the quality of the spare parts used.
Use original MAKITA spare parts only, marked:

Only original spare parts and accessories guarantee the highest quality in material, accuracy to size and function.

Original spare parts and accessories can be obtained from your local dealer. He will also have the relative spare part lists to
determine the required spare part numbers, and will be constantly informed about the latest improvements and also about spare
part innovations.

Please, take in mind that

in the case that foreign spare parts are used instead of the original MAKITA spare parts this will automatically

invalidate the MAKITA product guarantee.

Page

Advertising
Ce manuel est liée aux produits suivants: