Memorex MPH6925 - Manuel (Page 7)

7
Storing Mixed Tone/Pulse Numbers
If your phone is set up for pulse dialing, you can store a
mixed mode number (up to 16 digits) to easily access long
distance services.
1. Remove the handset from the base and press
MEMORY. The TALK/BATT LED flashes and you
hear a beep.
2. Enter the number to be dialed in pulse mode.
3. Press the
✱/TONE
button on the handset.
The
✱/TONE button
counts as one digit and
enters a pause.
4. Enter the number(s) to be dialed in tone mode.
5. Press MEMORY and a number (0-9) on the keypad
for the memory location you wish to use. You hear a
long beep and the TALK/BATT LED goes out.
Dialing a Stored Number
To dial a phone number stored in memory, press TALK,
then press MEMORY and the memory location (0-9).
Your phone will dial the stored number.
If you select a memory location that does not
have a stored number, the handset will beep
rapidly and the phone will not dial.
One-touch Dialing (SPEED DIAL)
Your phone is equipped with “One-touch SPEED DIAL” for
instant dialing. It is used to dial the phone number stored
in memory location 1.
(See “Storing a Number in Memory”.)
To instantly dial the phone number stored in memory
location 1, simply press SPEED DIAL. (There is no need
to press TALK. The phone will automatically dial.)
If you press SPEED DIAL and a phone number is not
stored in memory location 1, the phone will beep rapidly
and will not dial.
Chain Dialing
After dialing a number you may be requested to enter a
special access code, for example, when performing a
banking transaction.
1. Store the access code into one of the memory locations
(0-9).
2. Dial the main number.
3. Press MEMORY and the memory location of the
access code at the appropriate time.
Erasing a Stored Number
1. Remove the handset from the base.
2. Press MEMORY twice.
3. Press the memory location
number (0-9) you want to
clear. You hear a long beep
confirming that you have
erased the number.
Replacing a Stored Number
Remember, your MPH 6925 phone has 10 memory
locations, represented by the numbers 0-9 on the keypad. If
you store a phone number in one of these locations, then
attempt to store a different number in the same location
later, the new number will replace the previous one.
Selecting a Different Channel
If you encounter interference while using your phone, you
can manually change the phones channel for clear
operation. Interference can come from appliances or other
phones in your home. This function works only when the
phone is in use.
The CHANNEL button on the handset allows you to
choose between 20 factory set channels. During the course
of a conversation, if you hear static or noise which makes
it difficult to hear, press CHANNEL. The TALK/BATT
LED flashes, indicating the phone is changing to
another channel.
UC372BH (MPH6925) OM ENG 3/12/02 11:24 AM Page 7