Monster Power Monster Power PRO 3600 - Manuel (Page 14)

6
PRO 3600 POWERCENTER FEATURES
1. “Breaker Open LED“: When this LED is on, the thermal circuit breaker has tripped, due to overload, to protect your equipment.
2. “Breaker 15A-Press to Reset”: If the Breaker Open LED is on, press the breaker in to reset.
3. “On/Off” Button: Turns ON/OFF the outlets according to the pre-programmed power-up/down sequence.
4. Dimmer Knob: Adjusts the brightness of the XLR lamps.
5. XLR Lamp Connection: Provides power to illuminate the XLR lamps.
6. Voltage & Amperage Display: Displays line voltage and current usage.
7. Ground “OK” Indicator: Indicates the PowerCenter is plugged into a properly grounded 120V AC outlet.
8. Wiring “FAULT” Indicator: Indicates the line and neutral wires at the wall outlet are not wired properly.
If the indicator is lit, consult your local power company or a qualified electrician.
9. “Clean Power On” Indicator: Indicates Monster Clean Power circuitry is functioning properly.
10. “Abnormal Voltage” Indicator: Indicates that the incoming voltage is below approximately
80V AC or above approximately 130V AC.
11. “Protection On” Indicator: Indicates Monster surge protection circuitry is functioning properly.
12. Unswitched Convenience Outlets: These outlets are located on the front of the PowerCenter for easy access.
These outlets have a specially designed filter circuit for high current audio components.
13. Digital Filter 1: These outlets have a specifically designed filter circuit that reduces interference to your digital components.
14. Digital Filter 2: These outlets have a specifically designed filter circuit that reduces interference to your digital components.
15. Video Filter: These outlets have a specifically designed filter circuit that reduces interference to your video components.
16. Analog Audio Filter: These outlets have a specifically designed filter circuit that reduces interference to
your audio components.