Temperature controls, Operating instructions, Changing display temperatures from °f to °c – GE Monogram Bottom-Freezer Built-In Refrigerators Manuel d'utilisation

Page 8: Door alarm

Advertising
background image

8

Operating Instructions

Bottom Freezer Refrigerator

Temperature
controls

The temperature display shows the actual
temperature of the freezer and fresh food
compartments.

The actual temperature may

vary slightly from the set temperature based
on factors such as frequency of door opening,
amount of food, defrost cycling and room
temperature.

To turn off the cooling system

in both the

freezer and fresh food compartments, press
either + pad until both displays show OFF.

To turn the cooling system on,

press either –

pad. The preset temperatures of 0°F and 37°F
will appear in the display.

To check the current temperature setting for
the fresh food or freezer compartment,

press

the + or – pad once. After 5 seconds, the
display will return to the actual temperature.

To change the temperature settings,

press the

+ or – pads. Allow 24 hours for the refrigerator
to reach the temperature you have set.

Temperature Ranges

Low

High

Fresh Food

Freezer

NOTE: Setting the controls to OFF stops
cooling, but does not shut off electrical power
to the refrigerator.

Changing
display
temperatures
from °F to °C

To change the temperature display between
Fahrenheit and Celsius, press the Temp
Display °C/°F.

Door
alarm

To turn the Door Alarm feature on,

press

the pad once. The ACTIVE light will come on.
To turn it off, press the pad again.

When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the
door open for more than
2 minutes.

Preset Settings

Allow 24 hours to reach these preset temperatures.

34°F

1°C

–6°F

–21°C

45°F

7°C

+6°F

–14°C

Advertising