GE Top-Freezer Refrigerators GTR12 - Manuel (Page 10)

Installation Instructions
TRANSFER BOTTOM HINGE
TO THE LEFT
To access the bottom hinge, move the refrigerator
so it is 30” from a wall. Then carefully tip the
refrigerator back until it rests against the wall.
CAUTION:
Be sure that the coils
on the back of the refrigerator do not rest against
the wall. Doing so could damage the coils.
Remove the screws (some models have washers
with each screw), leveling leg and bottom hinge from
the right side. Remove the leveling leg from the left side
of the cabinet and install it in the right side.
Reassemble the bottom hinge on the left side.
NOTE: The leveling legs are not interchangeable.
4
10
30”
REHANG THE FRESH FOOD DOOR
If washers were used with hinges, make sure they are
in place on the bottom hinge. Place the fresh food door
on the bottom hinge, close the door and tape it in
place with masking tape.
With a flat blade screwdriver, remove the plug
button from the left side (top of door) and install on
the right.
5