GE Monogram ZBD6800 - Manuel (Page 6)

6
Dishwasher
Control
Settings
Wash Cycles Use the arrow pads to scroll through the wash cycles. The light above or next to the
selected pad will be ON to indicate which WASH CYCLE has been selected.
NOTE: This dishwasher is equipped with an ExtraClean ™ Sensor with automatic temperature
control; therefore, cycle time and total water consumption may vary depending on soil (heavy,
medium, light) and temperature conditions.
ANTI Heavy 9.1 gallons, 95 minutes
BACTERIAL Medium 7.8 gallons, 95 minutes
Light 6.5 gallons, 90 minutes
This cycle raises the water temperature in the final rinse to sanitize your dishware.
The cycle length will vary depending on the temperature of your inlet water.
NOTE: The Anti-Bacterial cycle is monitored for sanitization requirements. If the cycle is interrupted
during or after the main wash portion or if the incoming water temperature is so low that adequate
water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the
sanitized light will not illuminate at the end of the cycle.
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.
COOKWARE Heavy 10.4 gallons, 80 minutes
Medium 9.1 gallons, 90 minutes
Light 7.8 gallons, 100 minutes
This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle
may not remove burned-on foods. Everyday dishes are safe to be used in this cycle.
NORMAL Heavy 8.75 gallons, 70 minutes
Medium 6.25 gallons, 60 minutes
Light 5 gallons, 55 minutes
This cycle is for medium/heavily soiled dishes and glassware.
SPEED CYCLE 7.8 gallons, 37 minutes
(on some models)
This cycle is for everyday dishes and glassware.
You can locate
your model
number on the
tub wall just
inside the door.
Throughout this
manual ,
features and
appearance
may vary from
your model .
8 1 4 3 2 5 6
7
9 10
1 3 2 5 6
7
9 10
NSF INTERNATIONAL
Meets NSF Standard 184 Sanitization and Cleaning
performance of household spray-type dishwashers. R
E
S
I D
E N T
I A
L
Control Panel
ZBD6890 and ZBD0700
ZBD6800 and ZBD6880
8
ZBD0710
1 4 3 2 5 6
7
9 10
1