Geemarc CL320 - Manuel (Page 11)

10
Wall Mounting
Feed the guide tabs (1) on the wall-mounting bracket (2) in the slots
(3) on the underside of the telephone. Slide the wall-mounting
bracket 10 mm upwards until it audibly locks into place. Drill a hole
and insert a screw leaving about 5 mm of the screw projecting from
the wall. Guide the mounting hole (4) in the mounting bracket (2)
over the screw and slide the telephone downwards.
Caution: Ensure there are no electrical lines, water pipes etc. in the
wall
where the hole is drilled.
Turn the hook (5) in the receiver cradle so that the receiver can be
placed on-hook.
5
INSTALLATION