FRIGIDAIRE CFEB30S5GC - Manuel (Page 2)

2
ELECTRONIC OVEN CONTROL
Control Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the various
functions of the oven as described below. Note: The graphics on your timer may not look exactly like the one shown. This
doesn't change the way it operates.
Note: The oven function will not work if the time of day clock is not set.
The oven can be programmed to:
Bake normally, Keep warm, Time Bake,Delayed Timed Bake (delayed start), Broil and Clean.
Note: Push buttons or pads may be shaped differently.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold START TIME or DELAY START pad for 7 seconds. "- -" or
"SP" appears in the display. Within 5 seconds, press the UP or DOWN ARROW pad to switch between normal sound operation
and silent operation mode. The display will show either "- -" or "SP". Wait 5 seconds to return to normal operating mode.
Note: If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation
mode.
Temperature Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for
any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1.
Press and hold BROIL pad for 7 seconds until °F or °C appears in the display.
2. Press the UP or DOWN ARROW pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press CLEAR/OFF or STOP pad to accept the changes.
Bake Pad Used to enter
the normal baking mode
temperature.
Broil Pad- Used to
select the variable
broil function.
Select
Clean Pad
Used to
select the
self-
cleaning
cycle.
Stop Pad- Used to
clear any function
previously entered
except the time of day
and minute timer.
Push Clear pad to
stop cooking or
enable the oven
lockout feature
.
Up and Down arrow pads- Used along
with the function pads to select oven
temperature, cooking time, start time
(when programming an automatic start
time), time of day, clean time and minute
timer.
Clock Pad-
Used to set the
time of day.
Feature indicator
lights- These light
show which
feature is in use.
Cook Time
Pad- Used to
enter the length
of the baking
time.
Delay Start Pad- Used
to set the desired start
time for baking. Can be
used with BAKE TIME
to program a delayed
bake cycle.
Timer Pad- Used to
set or cancel the
minute timer. The
minute timer does not
start or stop cooking.
Oven, Preheat & Lock lights- The "oven" light indicates
that the oven is functionning. The "Preheat" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature.
The "Door Locked" light will flash until the door locks when
the self-clean cycle is in use. It glows constantly after the door
locks (some models).
Oven Interior
Light Pad-
Used to turn
oven interior
light ON and
OFF.
Warm & Hold Pad-
Used to set the Keep
Warm feature.
ADD 1 MINUTE PAD Used to add 1 minute
to the Timer Countdown. This feature works
with the Kitchen Timer only and does not
affect any cook time or start time functions.