Hamilton Beach 14700 - Manuel (Page 5)

5
1. Unplug iron. Fill the Removable
Reservoir according to directions.
Replace Reservoir.
2. Plug iron into outlet.
3. Turn the Temperature Control Dial
to the highest setting.
4. Allow 2 minutes for the iron to reach
desired temperature.
5. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
To Vertical Steam
6. Hold iron about 6 inches away from
garment and
press and
release the
Blast Button
to steam out
wrinkles. Do not
press Blast
Button more
than once every
2 seconds.
7. To turn iron off, turn Temperature
Control Dial to Off. Unplug iron.
8. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to
touch delicate garments.
Spray and Blast of Steam Buttons
Push Blast Button for an extra blast of
steam. Push Spray
Button to release a
fine spray of water
for difficult wrinkles
in cotton or linen.
Adjustable Steam Knob
This switch provides minimum steam
for wool or maxi-
mum steam for
linen. Set the
switch to O to
change to Dry
Iron.
Optional Features
(on selected models)
Blast Spray
Automatic Shutoff Reset Button
and Power On
Light –
The
Automatic Shutoff
Reset Button light
comes on when
the iron is first
plugged in. After
1 hour, the iron will
shut off and the light will go out. Push
the Reset Button to turn iron back on.
The Power On Light comes on when
the iron is plugged in and remains on
until the iron is unplugged. The light
stays on even if Temperature
Control Dial is turned to Off.
Power
Light
Reset
Button
840094100 ENv01 1/17/02 11:46 AM Page 5