Assembly, Grounding instructions, Danger – Hoover 120 V 60 HZ Manuel d'utilisation

Page 3: Description

Advertising
background image

3

Description

1. Assembly

1

2

3

10

9

13

11

4

14

5

12

6

8

1-3

6

7

Operate cleaning system only at
voltage specified on power unit.

This system is intended for
household use.

Grounding
Instructions

This appliance

must be grounded. If it

should malfunction or breakdown,

grounding provides a path of least

resistance for electrical current to

reduce the risk of electric shock. This

appliance is equipped with a cord hav-

ing an equipment-grounding conductor

(A) and grounding plug (B). The plug

must be plugged into an appropriate

outlet (C) that is properly installed and

grounded in accordance with all local

codes and ordinances.

DANGER-

Improper connection of the equipment-

grounding conductor can result in the

risk of electric shock. Check with a

qualified electrician or service person if

you are in doubt as to whether the outlet

is properly grounded.

Do not modify

the plug provided with the appliance -
if it will not fit the outlet, have a proper

outlet installed by a qualified electrician.

This appliance is for use on a nominal

120 volt circuit and has a grounding

plug that looks like the plug illustrated in

Fig. 1-1.

A

Temporary adapter (D) may be used

to connect this plug to a 2-pole recepta-

cle (E) if a properly grounded outlet is

not available. The

Temporary adapter

should be used only until a properly

grounded outlet (C) can be installed by

a qualified electrician. The green col-

ored rigid ear (F), lug, or the like extend-

ing from the adapter must be connected

to a permanent ground such as a prop-

erly grounded outlet box cover.

Whenever the adapter is used, it must

be held in place by a metal screw (G).

1-1

1-2

NOTE: In Canada, the use of a tempo-
rary adapter is

Not Permitted by the

Canadian Electrical Code.

B

C

D

E

A

F

G

1. Motor module

9. Power cord

2. Motor exhaust port

10. Data label

3. Mounting bar

11. Exhaust muffler

4. Dust container (contains

12. Hose inlet port

Items 11, 13, 14 & 15)

13. 90° elbow

5. Filtration body

14. Mounting bracket

6. ON-OFF switch

15. Vac cap

7. Overload protector
8. Low voltage receptacle

(24 volt)

CANAVAC SYSTEMS INC

ONTARIO, CANADA

LR37447

NRTL/C

MODEL

120 V

60 HZ

WARNING:

AVERTISSEMENT:

Serial No.
No. Desérie

Mount at least 12 in. from ceiling.
Connect to individual brance circuit.

To reduce the risk of electric shock do not

use outdoors or on wet surfaces.

Assurer un dégagement d'au moids 12 po. entre les plafond
selon les cas.
Brancher a une derivation distincte

Pour reduire les risgues de choc

matieres humides.

electrique ne pas utiliser a l'exterieur et ne pas aspiere de

E119989

C

UL

15

Advertising