Hamilton Beach 840091300 - Manuel (Page 5)

5
1. Unplug iron. Turn Adjustable Steam
Knob to (Dry
Iron). Place iron
soleplate on flat
surface. Open
water fill cover.
2. Using a cup, slowly pour 6 ounces
of tap water into water tank opening.
Do not fill iron directly from the
faucet.
3. Plug iron into outlet. Set iron upright
on heel rest.
4. Turn the Temperature Control Dial
to the highest
setting.
5. Allow two minutes for the iron to
reach desired temperature.
To Vertical Steam
6. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
7. Hold iron about 6 inches away from
garment and
press and
release the
Blast Button
to steam out
wrinkles. Do not
press Blast
Button more
than once every
2 seconds.
8. To turn iron off, turn Temperature
Control Dial to Off. Unplug iron.
9. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to
touch delicate garments.
Fabric Setting Chart
Steam
Setting
Steam Range
Dry Iron
Temperature Setting
Off
Nylon, Acrylic
Silk
Wool
Polyester
Rayon
Cotton, Linen
Ironing Instructions
Dry iron using spray if necessary.
Dry iron on the inside of the garment.
Use a press cloth and steam iron on the
inside of garment.
Iron while fabric is still damp.
Iron using spray if necessary.
For cotton, iron while still damp or use
spray. For linen, iron fabric on the inside
of the garment. Use this setting for
vertical steaming.
840091300 ENv01 9/24/01 4:32 PM Page 5