DE DIETRICH DVF300JU2 - Manuel (Page 16)

Présentation de votre lave-vaisselle
29
Présentation de votre lave-vaisselle
28
Description of your dishwasher
START/STOP: Press
this button to switch
your dishwasher on.
START/CANCEL:
Pressing this button
starts this pro-
gramme. Holding
the button pressed
down for 2 seconds
cancels the
Programme.
DELAYED START:
Press this button to
delay the end of
the programme by
3 or 6 hours.
PROGRAMME
BUTTONS: Press one of
these buttons to select your
programme.
SALT LIGHT: This indi-
cates that there is no
regenerating salt.
RINSE AID LIGHT:
This indicates
that there is no
rinse aid.
The control strip in the top of the door can be seen
when you open the door
Description of your dishwasher
The above photograph of the machine with the lower basket removed shows
you all the main components described in these operating instructions.
Regenerating
salt reservoir
Waste filters
Washing product
container
Rinsing agent
container
Lower sprinkling
arm
Information
plate (After-
Sales service
reference)
Drying valve
(depending on
the model)
Upper basket
Main filter
Anti-blocking
size wire
Control strip (Described
on the next page)
Your dishwasher is fitted with safety systems protecting you from flooding:
The ANTI-OVERFLOW SYSTEM. This system automatically activates
the drain pump if the water in the tub reaches an abnormal level.
The ANTI-LEAK SYSTEM. This system cuts off the water supply if a
leak is detected under the machine.
The METAL BRAID HOSE: This water supply hose is reinforced to
ensure maximum resistance to pressure surges.
Please read your dishwasher’s installation and operating
manuals carefully so that your machine will provide full and
complete satisfaction. These will enable you to discover all
the advantages of this machine and put them to best use.
Please read carefully Precautions when using
Environmental protection Advice, tips and remarks