MEDC LD15 - Manuel (Page 10)

Conditions of Safe use
The following conditions apply to the installation, operation and maintenance of the LD15. Failure to observe these
may compromise the safety integrity of the Beacon
1. The user shall comply with the requirements given in this Safety manual in regard to all relevant functional
safety aspects such as application of use, installation, operation, maintenance, proof tests,maximum
ratings, environmental conditions, repair, etc.
2. If the Beacon is to be used on a Fire Alarm system it is recommended as per BS 5839 part 1 (eq. EN 54),
that the product is tested at least once a week. In all other applications it is strongly recommended to test
the product at least once a year.
3. Selection of this equipment for use in safety functions and the installation, configuration, overall validation,
maintenance and repair shall only be carried out by competent personnel, observing all the manufacturer’s
conditions and recommendations in the user documentation.
4. All information associated with any field failures of this product should be collected under a dependability
management process (e.g., IEC 60300-3-2) and reported to the manufacturer.
01/15 © MEDC 2015