Livarno 7-ZONE SLATTED BED BASE (42 SLATS) - Manuel (Page 8)

8 / 1 8
IE GB
Dear customer,
Your new slatted frame can be easily assembled. In this manual, we will describe how to
assemble your slatted frame step by step.
We wish you a relaxing sleep.
IMPORTANT NOTE
Assemble the slatted frame on a soft and clean surface, also lay down the cardboard so that the
surfaces cannot be scratched or damaged. The slatted frame is ideal for all conventional spring,
latex and memory foam mattresses.
Should a piece be missing or defect, please contact our "customer service".
Our service hotline:
Qsource GmbH, AugusteBaurStr. 1 , D22587 Hamburg,
Tel.: 0049/40/87932653, Fax: 0049/40/87932637, EMail: [email protected]
Nous sommes joignables du lundi au vendredi de 8.00 à 1 6.00 heures
FOR YOUR SAFETY
CAUTION  danger of injury and property damage!
• Keep small children away from the packaging material. There is the risk of suffocation!
• Do not stand on the slatted frame. The individual strips are not designed for this weight.
• Do not sit on the elevated head part. The frame materials are not designed for this weight.
• Risk of crushing! Please make sure that you do not crush yourself or other people when
adjusting the head part.
• Only use the slatted frame for the intended purpose and do not overload it.
PURPOSE OF USE AND BEARING LOAD
The slatted frame is ideal for use indoors  protect it from moisture.
With equal strain  for example by one person laying down  the bearing load of the slatted
frame is a maximum of 1 20 kilograms.
UNPACKING AND DISPOSAL
Carefully remove all of the packaging material. Make sure that you do not accidentally throw
away assembly materials.
Dispose of the packaging in a sorted manner.
FOR CARE
In order to clean the slatted frame, do not use any abrasive or acidic materials or hard cleaning
brushes, etc.