Excalibur electronic GB12-CC - Manuel (Page 5)

Next the flashing indicator
tells you to set the date, begin-
ning with the year. Press
UP
or
DOWN
until you arrive at the cor-
rect year, then press SET . Then
use the
UP
or
DOWN
buttons to
scroll to the correct month, and
press
SET
. Finally, press
UP
or
DOWN
to input the day of the
month, and press
SET
. (The day
of the week adjusts automatical-
ly according to the date you have
set.)
CHOOSING 12- OR 24 HOUR
CLOCK AND DATE DISPLAYS
You can choose to have the
time displayed according to
either the 12 or the 24 hour clock
system. You can also choose
between two formats for display-
ing the date,
YYYY / MM / DD
or
DD / MM / YYYY
. (For example,
2003 4 29
can be changed to 29
4 2003
.) With the alarm dis-
abled, press
SET
six times until
12 HOUR
or 24
HOUR
appears at
the top of the screen. Press
UP
or
DOWN
repeatedly until both the
time display and the date display
are in the format you prefer. You
can press
SET
to exit this menu,
or simply wait 10 seconds until
the main display returns to the
screen.
Or, after setting the time and
date and pressing
SET
, you’ll see
that either 12
HOUR
or 24
HOUR
appears then at the top of the
screen. Press
UP
or
DOWN
repeat-
edly to select the desired date
and time formats, and then press
SET
. (If you don’t wish to
change the current setting, sim-
ply press
SET
.) To escape this
menu, press
SET
twice, or wait
10 seconds until the LCD returns
to the main display.
CHOOSING FAHRENHEIT OR
CENTIGRADE
When the alarm is disabled,
press
SET
repeatedly until either
FAHR
or
CENT
appears at the top
of the screen. Next push
UP
or
DOWN
once to select the alternate
temperature indicator. Then
press
SET
, or just wait ten sec-
onds, allowing the LCD to return
to the main display.
Or, after setting the time, date
and 12 or 24 hour clock, you’ll
see that either
CENTIGRADE
or
FAHRENHEIT
will flash at the top
of the display. You can use the
UP
or
DOWN
buttons also at this
time to change the setting, and
then press
SET
. (If you don’t
wish to
SET
change the current
setting, simply press
SET
.)
9
alternate with the monthly mean
temperature.
TIME :
In the center of the LCD,
the current hour, minute and sec-
onds are shown for the selected
time zone. (The time will adjust
as the globe is turned.) If the
alarm function is set, the display
shows the alarm time.
DATE AND DAY OF THE WEEK :
The date and day of the week in
a time zone are shown below the
time display. You can select from
two formats,
MM / DD / YYYY
or
YYYY / DD / MM
).
DST :
If the city you have
selected operates on Daylight
Saving Time, World Time Globe
Mini automatically adds one
hour to standard time and dis-
plays
DST
on the LCD. If a city
doesn't operate on Daylight
Saving Time, or if
DST
is not cur-
rently in effect for that location,
World Time Globe Mini knows
to subtract an hour to revert to
standard time. (You can also
enable or disable the
DST
func-
tion if necessary. See page 10.)
5. U
SING THE
B
UTTONS
SETTING YOUR LOCAL
TIME AND DATE
First check that the alarm is
off. (No bell should be on the
display.) If the alarm is enabled,
press
ALARM
once to disable it.
Next position the Time Zone
Bar by the city or location you
are in. (You can verify that you
have positioned the bar appropri-
ately by pressing
CITY
. Names of
cities which share your time
zone should appear consecutive-
ly on the screen.)
Then press
SET
. (
SET TIME
should appear at the top of the
display and the hour digit will
flash.) Use the
UP
or
DOWN
but-
tons to scroll through the num-
bers until you arrive at the cor-
rect hour, and press
SET
. (If you
don’t need to change the hour,
simply press
SET
a second time
to jump to the minutes.) Next the
minutes will flash. Press
UP
or
DOWN
to scroll through numbers
until you arrive at the correct
minutes. (If you don’t need to
change the minutes, simply press
SET a second time to jump to the
date.) Press
SET
.
8
ENGLISH ENGLISH