Eton 4000 - Manuel (Page 11)

E G O 4 0 0 0 P L U S O P E R A T I O N M A N U A L
21
continued
SELECTING HOUR MODE
This player has the choice of 12 or 24 hour clock
modes that can be changed when the player is
turned on or off. Follow the steps below to select
the hour mode:
1. Press SLEEP button for about three seconds,
HOUR MODE appears on the display.
2. Press UP/DOWN buttons to select 12 HOUR
or 24 HOUR mode then press SET button to
save it.
ALARM
Setting Alarm Time:
Follow the steps below to set Alarm 1/Alarm 2
time:
1. Press ALARM 1/ALARM 2 button to select
Alarm 1 or Alarm 2.
2. Press SET button and the hour indicator flashes.
3. Press UP/DOWN buttons to select desired
hour number.
4. Press SET button again to save and the
minute indicator flashes.
5. Press UP/DOWN buttons to select desired
minute number.
6. Press SET button again to save minute time
and the alarm time is set.
7. Press ALARM ON/OFF button until the correct
alarm on/off sequence is found then press
SET button to save or cancel. The “AL 1 or
AL 2” icon will indicate accordingly on the
display.
NOTE:
After the alarm is set, the LCD display shows the setting
for about ten seconds before resuming to the local time
clock.
Activating/Deactivating Alarm
Follow the steps below to activate/deactivate
Alarm 1/Alarm 2:
1. Press ALARM ON/OFF button once to see
“Alarm 1” and “Alarm 2” on display.
2. Either press ALARM ON/OFF button
repeatedly or press UP/DOWN buttons to
find the desired alarm setting combination.
20
OPERATING INSTRUCTIONS: CLOCK/ALARM
SETTING LOCAL TIME AND DATE
Once the power supply is connected initially or
after an extended period of non-use, the LCD dis-
play indicates “00:00 SATURDAY JAN/01/2000”.
You can select from numerous cities around the
world to serve as your local time zone. Once
your local time is set, the player can automatical-
ly tell you the time in different cities around the
world. Follow the steps below to set local time
and date:
1. Press WORLD/LOCAL button for three seconds
until a city name appears on the display.
2. Press UP/DOWN buttons to select your local
city name or time zone.
3. Press SET button for two seconds to save.
The city name changes to day of the week
on the LCD display.
4. Press SET button again and the city name
reappears. Display starts to flash year.
5. Press UP/DOWN buttons to select correct year.
6. Press SET button again to save year setting.
Display starts to flash the month.
7. Press UP/DOWN buttons to select correct
month.
8. Press SET button again to save month
setting. Display starts to flash the day.
9. Press UP/DOWN buttons to select correct day.
10. Press SET button again to save date setting.
Display starts to flash the hour.
11. Press UP/DOWN buttons to select correct
hour.
12. Press SET button again to save hour setting.
Display starts to flash the minute.
13. Press UP/DOWN buttons to select correct
minute.
14. Press SET button again to save minute
setting. The time and date are set.
VIEWING WORLD TIME
To view world time, press WORLD/LOCAL button
repeatedly until the desired city name indicates,
then world time will be shown for about 4 sec-
onds. The “WORLD” indicator will flash at the
same time on the display.