Stand instruction – Curtis SDPF651-BLACK-B Manuel d'utilisation
Page 9
8
Random, Split Horizontal in/out, Jalousie, Split Vertical in/ out, Radiation, Surround, Fade,
Right refresh, Next refresh, On Pan, Roll From Down To / Down, Brick
6.7 Photo mode:
Auto
Fit, Optimal, Full
6.8 Display
Contrast: Use
to select between 00 (lowest) and 40 (highest).
Brightness: Use
to select between 00 (lowest) and 40 (highest).
Saturation: Use
to select a point between 00(lowest) and 40(highest).
Tint: Use
to select between 00(most color) to 40(least color)..
6.9 Set time/date:
Press
, choose setup items with
as follows: Year, Month,
Date, Hour,Minute, Second, press
, use
to set, Press Save Time confirm.
6.10 Set Time format:
12/24, Press
, select with
, press
, then use
to set, press
to confirm.
6.11
Auto Power On/Off
: Press
, choose setup items with
as follows: Hour,
Minute, Status, press
, use
to set, Press
or
to confirm.
6.12 Format the memory:
Press
, choose No/ Yes with
, Press
to confirm.
6.13 Reset setting:
Press
enter, use
to select or unselect to reset all settings to default values,
press
to confirm.
6.14 Exit:
Press to exit setup interface.
7. Stand Instruction
Extend the bracket from the slot of the digital photo frame,rotate the bracket to choose
standing horizontally or vertically until it is locked in place. Please refer to the illustration
shown below.