Curtis FRW1213 Manuel d'utilisation
Page 14
calling service center.
PROBLEM POSSIBLE
CAUSE
thermoelectric cellar do not
operate.
Not plugged in using different voltage. The circuit
breaker tripped or a blown fuse.
thermoelectric cellar is not cold
enough.
Check the temperature control setting.
External environment may require a higher
setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The thermoelectric cellar does not have the
correct clearance.
The light does not work.
Check the service center.
Vibrations.
Check to assure that the thermoelectric cellar is
level.
The thermoelectric cellar seems
to make to much noise
The thermoelectric cellar is not level.
Check the fan.
The door will not close properly.
The thermoelectric cellar is not level.
The doors were reversed and not properly
installed.
The seal is weak.
The shaves out of position.
LED could not display.
Main control board does not work.
PCB Problem.
There is some problem with the plug.
LED display error.
Weak quality of display.
Temperature point is out off.
Bottoms are not functional.
Temperature controller panel is damaged.
X SERVICE & IMPORTANT NOTICE
1, This machine is designed to be only used in “N” climate class (61-90
°F
)
2, Upon receipt and inspection of the unit, If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualified person in order to